Browse Technologies by  


UPN Ref Technology
150 Engine multi-starting for city and urban driving
Turning car engines off in traffic jams or stops will save on fuel consumption, engine maintenance, noise, pollution and battery drain. This is made possible by using a new concept called slow-start with the help of an add-on available on the market for 100$.
View Technology
137 Exhaust-gas recirculation system
Exhaust-gas recirculation (EGR) is a known technique for reducing the NOx emission of combustion engines. In the case of EGR, some of the exhaust gases are fed back to the inlet of the engine. A problem in the case of exhaust-gas recirculation is the metering of the quantity of exhaust gas in the inlet duct. This determines the emission of the respective internal combustion engine. In order to limit the NOx discharge, sufficient exhaust gas has to be recirculated. On the other hand, an unduly large addition has the consequence that the power of the internal combustion engine is adversely affected if this is at the expense of the quantity of air. With an excess EGR flow, the particle emission also increases.
View Technology
90 Variable Torque Electrical Motor
The Variable Torque Electrical Motor (VTEM) is designed to convert variable input electrical power into a varying output mechanical torque. The value of electrical power input to the device determines the specific value of the output mechanical torque.
View Technology
83 High integrity, anti-corrosion and mechanical protection ultrathin coating that cures in seconds (No VOC, HAP, isocyanides, 100% solids)
A UV curable, high integrity sustainable system that can be used as a repair coating on existing coated surfaces or on carbon & stainless steel, aluminum, concrete, glass, fiberglass, plastics and more. Cures in 10 seconds or less upon application of UV lamp. This is a 100% solids liquid coating that does not contain solvents, VOC, HAP, isocyanides and can be customized to meet specific performance needs such as anti-corrosion, anti-fouling, anti-graffiti, chemical and mechanical resistance, flow assurance and more.
View Technology
67 High performance polymeric raw material for adhesive films
A new innovative polymer which vinyl acetate content can vary between 40 and 90 percent. The technology has outstanding tack characteristics, remains elastic at low temperatures and shows excellent shear strength.
View Technology
65 Additives for the plastics industry
Unique organic polymer particles which are able to absorb and carry a variety of liquid chemical actives. These particles are robust and can be easily compounded into commercial thermoplastics, liquid polymers, polyester resin and rubber to either positively fragrance plastics or as a means of providing recycled plastic odour neutralisation.
View Technology
61 New superhydrophobic coatings
The technology consists of very strong superhydrophobic coatings that repel a variety of liquids and oils leaving the surface completely dry and clean.
View Technology
57 New processing technologies for high-performance thermoplastic composites
The cost effective manufacturing processes enable automated production of high-performance thermoplastic composite parts and their joining into a geometric complex shape.
View Technology
56 Breakthrough fiber-based battery separator
The nonwoven battery separator is formed from a specific assembly of nanofibers and microfibers that allows thinner, lighter and smaller batteries.
View Technology
39 Inorganic and organic nanofibrous materials
Novel nanofibrous materials have been developed such as ceramic nanofibers and organic nanofibers that have a plurality of applications.
View Technology
slider